Ali Hasbi Ramadani, Yunus, Tukiran, Lucia Tri Pangesthi, Niken Purwidiani, Rizdana Galih Pambudi
In parametric modeling, the rules and images that form the shape of an object depend on what the user needs. The benefit of the parametric model is that the user can modify the design of the intended object just by adjusting its parameters without needing to redraw it. In this study, most concerned at stress allocation at vacuum pressure pan. Drying with vacuum pressure the aspect mechanisms that expend the greatest quantity of energy, derived to the considerable potential energy required for the conversion to vapor of water. The result showed Stress inside and outside range of the pan could be handle, so that means it is still safe range. The vacuum pressure at -15 inHg the stress occurred in pan area is about 2.985 - 22.657 Mpa. Then when the vacuum pressure at -20 inHg the stress occurred in pan area is about 4.0859 - 31.004Mpa. Then when the vacuum pressure at -25 inHg the stress occurred in pan area is about 5.185 - 39.351 Mpa © 2025 IEEE.
Universitas Negeri Surabaya, Faculty of Engineering, Surabaya, Indonesia; Universitas Negeri Surabaya, Faculty of Engineering, Surabaya, Indonesia; Universitas Negeri Surabaya, Faculty of Mathematics and Natural Sciences, Surabaya, Indonesia; Universitas Negeri Surabaya, Faculty of Engineering, Surabaya, Indonesia; Universitas Negeri Surabaya, Vocational Faculty, Surabaya, Indonesia; Universitas Negeri Surabaya, Surabaya, Indonesia
